What to have in the room with you
- A Samsung or LG television that carries Smart IPTV in its own store
- The MAC address the app shows on its first screen
- Your personal M3U link from the WhatsApp activation message
- A phone or laptop, because the upload does not happen on the television
No login in hand yet? Take the free 24-hour line, or read the price table first.
From a blank screen to live television
Ask whose television this is before you start
This is not a philosophical question. You are about to register a playlist against a television's MAC, and after a week that television asks for a small one-time activation of its own. Both things attach to the set rather than to you. On a television you own, in your flat or at the place by the coast, that is fine and the arrangement lasts for years. On a television you have rented for a fortnight, it is the wrong tool: you would leave your playlist registered to somebody else's hardware and pay an activation you cannot take with you. Use a player you can sign in and out of on those screens instead.
Install it and write the MAC address down
Open the television's own store, look for Smart IPTV, and install it exactly as you would any other app on the set. Open it once. It will show a MAC address, and you should write that down on paper or photograph the screen, because the next step happens on a different device and walking back and forth to squint at a television across a room is how wrong characters get copied. The address is a set of pairs separated by colons. Note it exactly, colons included.
Upload the playlist from a phone or a laptop
Go to siptv.app/mylist in a browser. Put the MAC address in exactly as the television showed it, paste your personal M3U link into the URL field, turn on the option to keep the list online so it refreshes by itself, and send it. Nothing visible happens on the television yet, which is normal. Take a moment here to treat that link carefully: it carries your username and password inside it, so do not paste it into a shared computer, a group chat or anything that keeps a history you do not control.
Restart the app on the television
Close Smart IPTV properly rather than simply backing out of it, then open it again. The channels and guide load in from the playlist you uploaded, usually within a few seconds, sometimes after a minute on a slower set. If the television shows the same empty screen it did before, give it one more restart before deciding anything has gone wrong - the app reads the list on startup, and on some sets that means a genuine restart rather than a return to the home screen.
Understand the trial, then the one-time activation
The app gives you seven days, after which it asks for a small one-off activation for that specific television, taken at siptv.app/activation. That payment belongs to the developer of the app. It is not part of your plan with us, we receive nothing from it, and we cannot arrange, refund or discount it. It is charged once for that set rather than every year, which is why people put up with it - but it is worth knowing before you put the app on three televisions and meet the charge three times.
Check it works, and plan the second television properly
Play a channel and leave it a couple of minutes; open the guide; switch groups once. Then remember the rule that catches people out later: one television holds one playlist at a time, and each set is its own upload against its own MAC with its own activation. A house with a living room set and a bedroom set means going through this twice. That is not a limit on your subscription - installs are not capped, and it is simultaneous streams that your plan counts - it is simply how this particular app is built.
Where it tends to stall, and the fix
The upload went through but the television is still empty
Wait a minute and restart the app once more before assuming failure, because the list is read at startup. If it is still bare, go back to the upload page and compare the MAC character by character against what the television shows, colons included. A single wrong character does not produce an error anywhere - it quietly files your playlist against a television that does not exist, which is why the failure looks so silent.
Yesterday's channels have been replaced by a different list
The app holds one playlist per television at a time, so a second upload against the same MAC takes the place of the first rather than sitting alongside it. If someone in the house uploaded something else, or you sent a trial link over the top of your own, re-upload the correct M3U and restart. If you genuinely want two lists on one screen, this is the wrong app for that and a player with multiple playlists is the answer.
The television was reset or swapped and everything vanished
A factory reset, a replaced main board or a new television means a new MAC, and the upload is tied to the old one. Open the app on the set as it is now, read the address it shows today, and upload the playlist again against that. Be ready for the activation to be asked for again as well, since it belongs to the television rather than to you - that is the developer's arrangement, not ours.
It is fine at home and unwatchable at the other house
The television did not change, so look at the line. Test the speed on a phone joined to the same Wi-Fi, standing where the television stands. About 10 Mbps carries HD comfortably and a steady 25 Mbps is what one 4K stream needs, and a connection shared with other guests in the evening can sit well under both. If the network holds you at a sign-in page first, a television app cannot answer it: use a phone hotspot or a travel router that signs in on your behalf.
Other players that take the same login
M3U playlist
Every plan includes a personal M3U link. What that address actually contains, which players need it, how to add the guide and why free lists die.
IPTV Smarters Pro
The player that reaches nearly every screen. Install IPTV Smarters Pro, sign in with three values, and carry the same login to the next television.
Every other guide
The rest of the devices and players, listed on one page for whatever you find at the other end.
A login for that Smart IPTV (SIPTV), before the evening goes
The shortest term costs $15 and opens 25,000+ channels. Ask on WhatsApp and the details come back in under 15 minutes, ready for the Smart IPTV (SIPTV) in front of you.
Smart IPTV (SIPTV) IPTV questions people ask
Smart IPTV and SSIPTV - which one is which?
Two separate apps, by two separate developers, solving the same problem in nearly the same way, with names close enough to cause endless confusion in support chats. The one this guide covers uses the MAC upload. SSIPTV will usually accept a link typed on the television itself. Both work with an IPTVGREAT playlist, so in practice you use whichever of them your television's store actually stocks.
Is the activation fee part of my subscription?
No. It is charged by the people who make the app, once, for that television, and it has no connection to your plan here. We do not collect it, cannot waive it and do not earn from it. If you would rather not pay a third party at all, install a free player that signs in with your username and password instead - the same account drives both.
Do I have to upload the list again when I renew?
No. A renewal keeps the same credentials, so the link already registered to that television keeps working and there is nothing to touch. The only reasons to upload again are a changed MAC, a playlist that was overwritten by another one, or a request from support to move you to a different address.
Can I use this on a television in a rented apartment?
You can, but think about what it leaves behind. Your playlist stays registered to that set until somebody overwrites it, and the activation is spent on hardware you are handing back. For a fortnight somewhere, a player you sign into and then sign out of is the better tool, or a stick from your own bag plugged into the spare socket. Save this app for televisions that are yours.